Squid 3.1 必須開 ipv4,ipv6
今天在更新主機到 fedora12 時,squid 一直不能用,顯示 comm_open: socket failure: (97) Address family not supported by protocol,後來上網查找,才知 fedora12 的 squid rpm 檔,內定開啟 ipv4 與 ipv6 ,因為我將 ipv6 disable ,所以不能用,解決方法是將 ipv6 打開,或是重新編譯 squid 將 ipv6 disable,就可以了
迴響
Squid 3.1 必須開 ipv4,ipv6 | 豬窩
I don't even know how I ended up here, but I thought this post was good.
I do not know who you are but certainly you're going to a famous blogger if you are not already ;)
Cheers!
Squid 3.1 必須開 ipv4,ipv6 | 豬窩
I go to see every day some blogs and blogs to read posts, except this weblog presents feature based writing.
Squid 3.1 必須開 ipv4,ipv6 | 豬窩
If some one needs to be updated with most recent technologies then he must be pay a visit this website and be up
to date every day.
Squid 3.1 必須開 ipv4,ipv6 | 豬窩
Your way of explaining everything in this piece of writing is actually nice, every one be able to without difficulty understand
it, Thanks a lot.